With the Exmark Turf Tracer S-Series, you can choose from four rugged engines including the eco-friendly, Electronic Fuel Injection (EFI), propane Kohler® PCV680. Then, match that power to cutting decks ranging from 36 to 52 inches. In whatever configuration you choose, you’ll get our patented Enhanced Control System (ECS) for ultimate operator comfort. Which translates to day-long operator productivity.
Equipment | |
---|---|
Steering Control | Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. |
Casters | .38" thick caster yoke arms |
Front Caster Tires | 9 x 3.5-4, smooth-tread, semi-pneumatic. |
Drive Tires | 16 x 7.5-8, 4-ply Turf Master® |
Safety Package | Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine |
Parking Brake | Lever-actuated mechanical compression. |
Electrical | 12-volt battery with 15-amp alternator. |
Cup Holder | No |
Power Components | |
---|---|
Engine Model | FS600V |
Engine Brand | Kawasaki® |
Engine Series | V-Twin |
Engine Speed | 3,600 rpm |
Air Filter | Standard Engine Manufacturer's air filter |
Drive Description | Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts. |
Speed | Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. |
PTO Engagement | Electromagnetic 105 ft-lbs clutch. |
Fuel Capacity | 5-gallon (18.9-L) fuel tank. |
Drive Wheel Release | Allows unit movement without engine running. |
Deck Lift | Manual lift with hairpin from hole to hole for position adjustment. |
Engine Type | Carbureted |
Engine Displacement | 603 |
Drive | Hydro-Drive |
Fuel Indicator | None |
Carb Compliant | No |
Fuel Type | Gas Carbureted |
Decks | |
---|---|
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch. |
Width / Cutting Deck | 48" |
Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength. |
Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. |
Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
Blade Tip Speed | Approximately 18,500 fpm. |
Blades | 3 Blades at 16.25" Length |
Dimensions | |
---|---|
Width | 59.5in. (151.1 cm) |
Length | 73.7 in. (187.2 cm) |
Height | 42.0 in. (106.7 cm) |
Curb Weight | 606 |